LED & ELECTRONICS ISSUES
LED Not Turning On (Detailed)
If your LED is completely unresponsive, carefully work through each step. First, ensure the device has been charged for at least 1–2 hours. A deeply discharged battery may not respond immediately. Next, test with a different charging cable and power
LED Is Dim or Flickering
A dim or flickering LED is almost always related to insufficient power. First, fully charge the device and test again. If the issue continues, the battery may no longer be able to supply consistent power. This is common after extended use and is cons
LED Won’t Change Modes
If your LED is stuck in one mode:. Press the button firmly and slowly cycle through modes. Avoid rapid clicking, as some devices require deliberate presses. If the issue continues, perform a reset by holding the button for 5–10 seconds. If the device
LED Turns Off During Use
If your LED turns off while spinning or in use:. First, fully charge the device and test again. If the issue persists, check for:. If the device consistently shuts off after short use, the battery is likely the cause. To request Warranty service, ple
Button Not Responding
If the button is not responding:. Press firmly and ensure your finger is centered on the button. Check for dirt or debris around the button area. If the button feels physically stuck or unresponsive, this may indicate misalignment or mechanical wear.